دستگاه برچینگ هیدرولیک اتوماتیک Mitech MUV-2Y، از شکاف پردازش کنترل تک تراشه، انتقال هیدرولیک ساختار چاقوی دوگانه، دو قطبی موقعیت دوگانه ، قالب گیری طراحی پردازش استفاده می کند. کیفیت پردازش قابل اعتماد و هویت خوب است. برچینگ با سختی بالا، پوشش خوب، عمر طولانی که توسط مواد خاص و ساخت دقیق فرآیند خاص ساخته شده است. دستگاه برچینگ هیدرولیک برای تست ضربه تجهیزات پیکربندی حرفه ای، به ویژه برای تأثیر پردازش نمونه V-notch و U-notch استفاده می شود. تجهیزات تست دقیق حرفه ای لازم برای بهبود راندمان تولید و صرفه جویی در هزینه های تولید است.
Function & application
Professional for the impact of sample V-notch and U-notch processing
Working Principle
Working Conditions
l Operation Temperature:Ambient temperature～45℃;
l Relative humidity:20％～80％;
l In an environment free from vibration,corrosive medium and high magnetic field
l Installed on a flat basis.
l Power supply voltage fluctuation does not exceed 10% of rated voltage.
Instrument Features
l Used for the impact of sample V-notch and U-notch processing;
l With features of novel shape, strong structure, high reliability, simple operation;
l Take the hydraulic transmission of the double knife structure, double pole double position,a processing drawing molding,
the processing quality is reliable and good identity;
l The broach with high hardness, good wear resistance, long life which made by special materials and special process precision
manufacturing, each knife can be processed about 20,000 samples;
l Simple and reliable operation, high efficiency;
l Sample gap processing only need 8 seconds, easy to operate and reliable,with high efficiency;
l Consistent with GB2106-80、GB229-94-2007、ASTM E23、EN10045、ISO148、ISO0083 and other relevant domestic and
foreign standards.
Operating Method and Attentions
Instrument Maintenance
l Before using the instrument, please read the instruction manual carefully, understand the operation steps and precautions,to
avoid the damage caused by improper operation or personal safety accident;
l Before each boot should be used to inject a small amount of oil gun around the knife box into a small amount of oil;
l Oil return valve is strictly prohibited to adjust. If you want to adjust to the clamp at the oil can flow to the knife is appropriate,
the return valve should not be too small, otherwise the pump motor easy to burn;
l After the drawing is completed, the clamp must be released to remove the specimen before allowing the broach to rise;
l Each time of the sample processed, it is necessary to clean up the iron scrap on the cutting edge so as not to affect the
processing quality.
l Replace the new knife, you must re-adjust the clamp to ensure that the depth of the specimen gap appropriate.
Enter your opinion about this product