دستگاه تست خمش مکرر سیم فلزی MJWJ-10
Mitech MJWJ-10 Metal Wire Repeated Bending Test Machine
- برند : شرکت MITECH
- دسته بندی : سایر ابزار اندازه گیری فیزیکی
دستگاه تست خمش مکرر سیم فلزی Mitech MJWJ-10، که توسط سرعت دستگاه تست تک تراشه کنترل می شود، می تواند برای تست خمش مثبت و منفی هواپیما مثبت باشد. عملکرد پایدار، عملیات ساده، ساختار قوی و ساده و راندمان بالا است. به طور گسترده در کارخانه های فولادی، خم شدن محل ساخت و ساز و آزمایش خمش میلگرد فولادی استفاده می شود. تجهیزات تست دقیق حرفه ای ضروری برای بهبود راندمان تولید و صرفه جویی در هزینه های تولید است.
Function & application
Widely used in metal wire repeat bending test.
Working Principle
Test machine measured by the sensor force generated by the signal into the measurement amplifier into the A / D converter into a digital signal is accepted by the computer system, the digital processing, the computer system to deal with the operation of A / D conversion The signal from the LCD display data
Working Conditions
Operating temperature: room temperature ~ 45 ℃;
Relative humidity: 20% to 80%;
No vibration around, no corrosive media, no strong magnetic field interference;
Horizontal installation on a solid basis;
Supply voltage fluctuations do not exceed 10% of the rated voltage.
Instrument Features
l Widely used in metal wire bending test repeated to test the metal wire in repeated bending to withstand the plastic deformation of the performance and display of defects;
l Novel shape, strong structure, accurate control, balanced operation, easy operation;
l The use of SCM control, high efficiency, especially for continuous testing;
l Digital display test results, intuitive readings, high test efficiency;
l Plane positive, reverse bending test arbitrary choice, the angle set arbitrarily;
l In line with GB, ISO, ASTM and other relevant standards at home and abroad.
Operating Method and Attentions
l Before using this instrument, please read the instruction manual carefully, understand the operation steps and precautions, avoid the damage caused by improper operation or personal safety accident;
l Test machine is a large precision instruments, should pay attention to water, moisture. Exposed workstations, upper and lower beam parts and attached parts should be coated with anti-rust oil to prevent rust;
l If idle for a long time, test it at least once a week to prevent rusting
دیدگاه خود را در مورد این کالا وارد نمایید.