تشخیص عیب ذرات مغناطیسی MT-1C از بسته باتری لیتیومی با ظرفیت بالا استفاده می کند، می تواند DC را از طریق فرکانس متغیر به AC تبدیل کند، آشکارساز نقص پودر مغناطیسی را با منبع تغذیه مغناطیسی ارائه می دهد. با مصرف برق کم، می تواند بیش از چهار ساعت پس از شارژ مداوم کار کند. مخصوصاً برای کار در مناطق وحشی و هوایی مناسب است.
Function & application
It is widely used in the industry of aircraft manufacturing, boiler and pressure vessel, electric, oil field, shipbuilding, turbine and combustion engine parts, mine, machinery, standard parts, oil pump, vehicle parts, bridging, chemical, railway, large mechanical components, steel structure equipment etc. It mainly detects the surface detection of forging, quenching, welding, fatigue, for example, irregular workpiece of chain, crankshaft, bearing, high strength bolt, spring, forging, petrochemical pipe, valve, vane, gear, anchor chain, welding seam etc.
Working Principle
Put the workpiece into high-intensity magnetic field, connect electric to make it magnetized, if there are flaws (crack,slag) in or near the surface, there will be a leakage around the flaws. Put good quality magnetic powder(usually the magnetic iron oxide powder)on the object, magnetic powder will gather together near the leaked magnetic field, piled up to form visible traces of magnetic powder. In the proper light, we can see the marks and judge the position, size, shape and degree of the flaws.
Working Conditions
Operatiom temperature: －10℃～＋40℃
Storage temperature: -20℃～＋70℃
Relative Humidity: ≤80％
The environment should avoid strong vibration, magnetic interference, corrosive medium and heavy dust.
Instrument Features
l Portable high-capacity lithium battery pack without limitation of 220V power supply. With low power consumption and small volume, charging either online or offline. It is especially proper for working in the wild and aerial area.
l Adjustable illumination brightness and working power can meet different testing demand and save the setting.
l New power supply can enhance the testing depth and sensitivity.
l Pulse power supply can continuous work without chill time.
l Combine all traditional advantages in one unit can detect surface flaws fast, clearly and accurately.
l Adjustable brightness, power and range can meet different demand.
l Small size with equipped bag can improve working efficiency.
Operating Method and Attentions
Connect the line with detector, start the detector, press detection, choose proper polar distance according to the workpiece.
l When making dry powder detection, put the powder on the workpiece, move the yoke with 40mm/s, make sure they are well connected, observe whether the powder is pile up.
l When detecting, there must be overlap, the overlap area should less than 25mm, judge the marks correctly.
l If the pile up is appeared, blow the redundant powder, make the mark clear.
l If the mark can’t be judged, you should polish the surface and test again; if the mark is flaw, press confirm to capture the photo.
Instrument Maintenance
l Use soft cloth to clean the detector.
l Avoid strong vibration, place in dry area.
l When not using for a long time, you should charge it every three months to avoid damping the components.
l Do not press the key too hard or use metal to knock it.
l After turning off the detector for 5s, boot again, do not boot immediately.
دیدگاه خود را در مورد این کالا وارد نمایید.