دستگاه خشک کردن خودکار فیلم MITECH MD-500 عمدتاً برای خشک کردن سریع فیلم پس از تشخیص اشعه استفاده می شود. از غلتک PU و غلتک لاستیکی نرم برای انتقال فیلم استفاده می کند. همراه با shaft اسفنجی با جذب آب خوب، می تواند به سرعت و کارآمد فیلم را بدون آب و آسیب خشک کند. همانطور که چند منظوره است، سرعت چرخش قابل تنظیم است و بنابراین کارکردن با آن را راحت می کند. فیلم را می توان دوباره توسط منبع آب خارجی یا سینک آب داخلی شستشو داد. پمپ سیرکولاسیون امکان تامین آب تمیز را در مواقع ضروری فراهم می کند. در یک کلام MD-500 تجهیزات لازم برای تشخیص اشعه است.
Function & application
MITECH Film auto-dry machine MD-500 series products is mainly used in drying process of Manually washed X-ray film, such as photography, medical, scientific research, industrial and other fields.
Working Principle
Working Conditions
Instrument Features
Easy operation, fast speed, high efficiency;
Muti-functional design, Two - way water source;
Operation without water marks or damage;
Inner circulation pump to supply clean water automatically;
Operating Method and Attentions
Operation
Use anhydrous cycle
Fill the water tank with clean water, and switch the water inlet into the no-load position;
Open the drain valve to drain until there is no blisters; put the water pipe into the bottom of the bucket, and set the switch in the position of two. If there is water out on the surface of the water tank, you can adjust the drain valve to control the flow of water, regulating valve range is generally within 45 °. After the adjustment, check whether the water continues to emerge. The purpose of this operation is to achieve the cycle of water up and down;
When everything is normal, put into the roller group, cover the cover, then you can use it.
External water source
External water source, open the water switch, put the change-over switch in the position of one ,then you can use it.
Instrument Maintenance
Before working, make sure to clean the platform and body to avoid dust and dirt;
Check if the peripheral equipment is connected normal. Liquid level should be upper 1/3 of the bucket. The tube should be at the bottom and do adjust the overflow pipes at suitable position;
Open the cover, wipe out the water drops as liquid vapor. Check is there is crystallization or dirt on the surface of drive roller. Fill water into the cleaning tank after wiping out;
Press the annual supply water button, check if it works properly;
It can run only when the machine is heated at the setting temperature;
Before working, putting into a piece of old clean film to make sure the machine works well;
After work, shut down the power and water inlet, draining is also needed. Open the cover a little bit to avoid condensation. Keep ventilated if possible.
دیدگاه خود را در مورد این کالا وارد نمایید.